JB Weld Essential Travel Pack

STEELSTIK™ EPOXY PUTTY

SteelStik™ is a hand mixable, steel-reinforced, non-rusting epoxy putty that
quickly repairs or rebuilds anything made of metal. After mixing, it forms
an industrial-strength polymer compound that can be moulded into shapes
or used to build up, patch and repair steel components. SteelStik™ sets in 5
minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and
painted. SteelStik™ cures to a dark grey colour, is rated at a tensile strength of 900 PSI
and will withstand temperatures up to 148ºC. Certified by NSF , means it is
“Drinking Water Safe

WATERWELD™ EPOXY PUTTY

WaterWeld™ will plug or seal leaks and patch holes and cracks in almost
anything. Ideal for repairing plumbing, fuel tanks, tubs and showers, drains,
pools and spas, boats and potable water tanks; setup occurs even under water.
After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld™
has a set time of 25 minutes and sets hard in one hour. WaterWeld™ cures to
an off-white colour, is rated at a tensile strength of 1300 PSI and will withstand
temperatures up to 148ºC. Resistant to water, oil, gas, diesel and hydraulic fluids.
Certified by NSF , means it is “Drinking Water Safe”. 

PLASTICWELD™ EPOXY PUTTY 

PlasticWeld™ is a hand mixable, fast-setting epoxy putty that forms a
durable bond to most major plastic types. After mixing, it forms a polymer
compound that can be moulded or used to build up and repair just about
anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and
painted. PlasticWeld™ has a 20-25 minute work life; functional cure occurs in 3 hours.
PlasticWeld™ cures to an off-white colour, is rated at a tensile strength of 600 PSI and
withstands heat up to 148ºC. Does not adhere to polyethylene, polypropylene or
some other plastics. Test for adhesion first. Certified by NSF , means it is “Drinking
Water Safe”.